![]() ![]() Then we cut 2×4 welded wire to size to fit the tub and sanded the sharp edges off. We cut away a portion of the small end to be the top of the feeder where we will put the hay in. They only had one of the larger size, so we decided to try one big and one small. We bought two multi-purpose plastic mixing tubs. This idea was posted online by Michigansnowpony. ***Be sure to read the changes section at the bottom of the post about the things we learned now that we have used them for awhile*** If it didn’t work we could build a more expensive one and wouldn’t have lost much in the process. We figured since we already owned most of what we needed it would be the best thing to try first. We spent $20 and were able to build one big and one small feeder. So we will be building the outdoor manger for the sheep and goats at that time.įor the indoor racks we decided to try an idea that included supplies that we already owned most of. In a few weeks, we will be building some more of the permanent fencing around the barnyard to replace the stock panels. We have found a plan for an outdoor one that is built into the fencing. We looked at several options online and discussed our needs. We knew we needed to find a way to feed them that decreased the waste. Screw at an angle from what will be the side into what will be the top/bottom.Now that we have the goats, we are finding that they are really wasteful with their hay. It is basically two mitered frames screwed together! Not hard at all!įirst, make the two long side frames using 2 – 2×4 28 1/2″ and 2 – 2×4 16″, 18″, or 20″ depending on which size feeder you are building! Using wood glue and the 3 1/8″ screws attach the 2x4s on the miters. Quickly you can throw together the frame of the goat hay feeder.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |